Five years ago in Glasgow, world leaders agreed that keeping global warming to 1.5°C would need accelerated action in this critical decade. This November, as COP31 opens in Antalya, the question has changed.

The new question is how quickly the world can turn its climate commitments into measurable results. In this article, Hakan Aydoğdu, CEO of CNC automation specialist Tezmaksan, explains why manufacturing needs to be part of the conversation.

Türkiye’s presidency has been clear that this is an implementation COP. Its Action Agenda sets concrete targets for 2035, including raising the global rate of circular material use to at least 15 per cent. Today that figure is below 7 per cent, according to the Circularity Gap Report. The programme also gives a full day, November 16, to science, industry and technology, covering green industrialisation, digitalisation, AI, SMEs and low-carbon manufacturing.

For manufacturers, that shift matters. Implementation happens on factory floors, one production decision at a time.

The other half of the equation

Most conversations about industrial decarbonisation focus on where energy comes from. Renewable electricity, electrification and alternative fuels all matter, and the Action Agenda rightly targets them. But there is a second half to the equation that gets far less attention: how efficiently manufacturers use the energy, materials, machines and capacity they already have. A factory running on clean power can still waste a great deal of it.

The scale makes this impossible to ignore. According to the Intergovernmental Panel on Climate Change (IPCC), industry was responsible for 24 per cent of direct global greenhouse gas emissions in 2019, rising to 34 per cent when the electricity and heat it uses are included. If industry is that large a share of the problem, how well it operates cannot be a secondary consideration.

The world has already recognised this. At COP28, governments committed to doubling the global rate of energy efficiency improvement to around 4 per cent a year by 2030. Progress is falling well short. The International Energy Agency (IEA) estimates that efficiency improved by about 1 per cent in 2024 and is on course for 1.8 per cent in 2025. Industry has driven around two-thirds of global growth in energy demand since 2019, yet its efficiency progress has slowed sharply. For an implementation COP, that gap is hard to ignore.

So what does implementing climate ambition actually look like inside a manufacturing operation? In my experience, it rarely starts with a grand gesture. It starts with visibility.

Many manufacturers still do not have a clear, real-time picture of how their machines are performing. A machine that sits idle between jobs, waits for an operator or runs well below its capacity still draws energy, still occupies floor space and still carries its share of the factory’s footprint.

With data, these hidden losses become a list of problems that can be fixed. Better production data helps manufacturers see downtime, underused equipment, inefficient processes and bottlenecks for what they are. That is the first step towards making better use of every kilowatt-hour and every kilogram of material.

Automation and digitalisation are climate tools

Automation improves consistency. A robot loading a CNC machine repeats the same process precisely, shift after shift, which means fewer errors, fewer rejected parts and less wasted material. Every part that is scrapped carries the energy and raw material that went into making it, so reducing scrap is a direct environmental gain. The potential is significant: the IPCC estimates that material efficiency could reduce steel demand by up to 40 per cent.

Automation also improves utilisation. When a machine can keep working through breaks, shift changes and unmanned hours, manufacturers get more output from the equipment they already own. That can delay or avoid investment in additional machines, along with the materials and energy needed to build, ship and install them.

Digital planning and monitoring complete the picture. They help manufacturers schedule jobs to reduce changeovers, spot maintenance issues before they become breakdowns and match production more closely to demand. For a sector that COP31 wants to make more circular, using materials and capacity well is where circularity begins.

None of this is limited to large manufacturers. Compact automation cells and accessible software now put these gains within reach of SMEs. In Türkiye, SMEs make up 99.6 per cent of all enterprises and provide 68.5 per cent of employment, according to the Turkish Statistical Institute (TurkStat). COP31’s focus on SMEs is welcome, because implementation at scale will depend on them.

Sustainability as a production decision

In too many businesses, sustainability still sits within an environmental, social and governance (ESG) strategy, measured once a year and reported separately from the business of making things. Yet the decisions that shape a factory’s footprint are made every day: which machine to buy, whether to automate a process, how to plan production, when to carry out maintenance, which software to use.

Each of those is a production decision. Manufacturers that recognise this and measure the efficiency of their operations as carefully as their output, will find that cutting emissions and cutting costs often point in the same direction. COP31 has asked the world to move from ambition to action. For manufacturers, the most practical place to start is with the energy, materials and machines they already have, and with making each of them work harder.

Learn more www.tezmaksan.com

For more news