NORD DRIVESYSTEMS’ site in Gadebusch will draw around a third of its required electricity from a nearby solar park in Lützow.

The municipality in Mecklenburg-Vorpommern, with a population of around 1,500, commissioned a 3.5-hectare solar park in June 2026. Together with photovoltaic modules installed on the roofs of two halls, the entire system is expected to generate 6.2 million kilowatt-hours of electricity per year. The largest consumer is a company belonging to drive manufacturer NORD DRIVESYSTEMS: Fertigungstechnik NORD in Gadebusch, which is about a 10-minute car drive away, takes advantage of the nearby solar park and will draw 2.67 million kilowatt-hours per year from the photovoltaic system. This accounts for approximately a third of its required electricity.

High energy demand

At its site in Gadebusch, NORD manufactures housings, shafts and worm wheels on six days a week, all day long. In five halls, over 180 employees are working on more than 80 machines and 60 interconnected systems. Every year, almost two million components leave the plant that is characterised by a high level of automation.

Part of the NORD DRIVESYSTEMS Group’s sustainability strategy is to continuously increase the self-produced electric power and the use of renewable energy. The company thus aims to achieve its target of reducing Scope 1 and Scope 2 greenhouse gas emissions by 45 percent by 2030 (compared with the base year 2024). At different sites of the NORD Group, respective projects involving the use of renewable power are being implemented.

NORD staff have chosen solar power

Becoming less reliant on fossil resources

The individual sites, such as Fertigungstechnik NORD in Gadebusch, thus make important contributions to achieving the group’s targets. Getting connected to the solar park is the plant’s latest effort to becoming less reliant on fossil resources. In 2012, a heat recovery scheme was launched and implemented step by step. Since then, plate-type heat exchangers have been ensuring that excess heat from the production machines is dissipated and used to heat factory halls, offices and hot water. The recovery system operates without additional heating when outdoor temperatures are above 0 °C. This alone helps Fertigungstechnik NORD save around a third of the 583,000 kWh of fossil heat energy it previously used each year.

Learn more www.nord.com

Click here for more news